Mexico SSR Type Portable KR18 KR24 Standing Seam Roof Sheet Roll Forming Machine
KR18 KR24 Movable Standing Seam Roll Forming Machine
KR18 KR24 are the popular profile drawing in Mexico. The KR-24 jointed sheet is rolled with portable equipment, which facilitates its transfer and installation. Its fixing is hidden by means of clips and its longitudinal overlap can be clipped, this guarantees a low maintenance cost and great impermeability.
The KR-24 sheet is of SSR type (Standing Seam Roof) ribbed and jointed on site. The KR-24 Steel Sheet (SSR-24) has a hidden fixing system based on clips, it reduces the risk of possible leaks since it is not required to drill the sheet for its installation. The KR-24 has no limitations in its length since it is manufactured in a single piece from gutter to ridge. It also allows the installation of insulating materials. Hooked Roofs can be installed on roofs with low slopes up to 2%.
This machine is portable, can be with trailor or not, the customer can put the machine on the truck and take the machine to the construction.
1. Specification
Size: approximately 4.5*1.0*1.2M
Weight: about 3.0 T
Axle and wheels: two axles, four wheels
Towing: adjustable draw bar height from 80mm-160mm with 80mm round hitch.
Working speed: Forming:10-13 m/min
Material of rollers: Good 45# steel, rigid chrome coated
Material of roller shafts: 45# steel, quenched HRC 58-62
Material of cutting blade: Cr12 steel
Forming station: 11 steps
Power plant:gasoline engine 24HP
Battery:12 Volt DC*2
Drive System: All hydraulic pump with engine
Drive/Forming Rollers: Chain drive
Host big frame structure H Frame
Cutting type: Hydraulic cutting
Manual Decolier:Carrying capacity 5 tons of steel coil
Working procedures: feeding-forming-cutting
2, Spare Part
|
De-coiler
|
1 set
|
|
Manual Super plier
|
1 set
|
|
Driving chains
|
1 set
|
|
Chain half section
|
5
|
|
Chain whole section
|
3
|
|
Polish wax
|
1
|
Working Flow of Standing Beam
Decoiler----Feeding and Leveling---Roll forming---Cutting---Run out tables
Profile Drawing:
Machine Shows:
Application:
Portable metal roof roll forming machine export standard packages details
1.Nude,with waterproof cloth and stow-wood.Imported computer control system packed with waterproof cloth and card board.
2.This producing line is maintained free of charge for 24 months.When the machine is used in China, we will install and debug the machine for free; if it is used at abroad,we will send the professional technician to debug.Buyers should take all the fees for technicians travelling abroad.
3.All the parts in the roll forming machine is free to maintain all the life,if in 24 months our company bear the cost for
exchanged the broken part like the new parts cost and express cost,if more than 24 month,we also free to maintain the broken parts ,but for send the new parts,the buyer need bear the express cost.
Votre message doit contenir entre 20 et 3 000 caractères!
